dns服务器怎么配置反向解析

要配置DNS服务器的反向解析，你需要在DNS服务器上添加一条记录，将域名指向你的服务器IP地址。具体步骤如下：，，1. 打开“控制面板”，选择“网络和共享中心”。，2. 点击“更改适配器设置”。，3. 找到你要配置的网络连接，右键单击并选择“属性”。，4. 在“Internet协议版本4(TCP/IPv4)”下，点击“属性”。，5. 在弹出的窗口中，选择“使用下面的DNS服务器地址”，并输入首选DNS服务器和备用DNS服务器的IP地址。，6. 点击“确定”保存更改。

DNS服务器怎么配置反向解析

DNS(Domain Name System,域名系统)是互联网的一项核心服务，它负责将人类可读的域名转换为计算机可识别的IP地址，在网络环境中，有时候我们需要对DNS服务器进行反向解析的配置，以便实现一些特定的需求，本文将详细介绍如何配置DNS服务器的反向解析。

什么是反向解析？

反向解析是指将一个域名映射到一组IP地址的过程，通常情况下，我们访问一个网站时，浏览器会向DNS服务器发送请求，询问该网站对应的IP地址，而在DNS服务器上配置了反向解析后，当其他设备或用户尝试访问该域名时，DNS服务器会自动返回与该域名关联的IP地址，这样一来，我们就可以通过域名来访问不同的IP地址了。

如何配置DNS服务器的反向解析？

1、登录DNS管理界面

首先需要登录到DNS服务器的管理界面，这里以BIND9为例，介绍如何登录：

sudo nscd -u bind

2、编辑区域文件

进入BIND9的配置目录，找到named.conf文件并打开：

cd /etc/bind
vi named.conf

3、添加反向解析记录

在named.conf文件中添加反向解析记录，假设我们要将域名example.com映射到IP地址192.168.1.100和192.168.1.101,可以在named.conf文件中添加以下内容：

zone "example.com" {
    type master;
    file "example.com.zone";
};

然后创建一个名为example.com.zone的文件，并在其中添加以下内容：

$TTL    604800
@       IN      SOA     ns1.example.com. admin.example.com. (
                        2011071001     ; Serial
                        3600        ; Refresh
                        1800        ; Retry
                        604800      ; Expire
                        86400       ; Minimum TTL
                         )
@       IN      NS      ns1.example.com.
ns1     IN      A       192.168.1.100
www     IN      A       192.168.1.101

这里定义了一个名为example.com的区域，类型为master,关联的区域文件为example.com.zone，接着在example.com.zone文件中添加了两条A记录，分别对应IP地址192.168.1.100和192.168.1.101，最后设置了TTL(Time to Live)值为604800秒。

4、重启DNS服务

修改完成后，需要重启DNS服务使配置生效：

sudo systemctl restart named

5、测试反向解析是否生效

使用dig命令测试反向解析是否生效：

dig @localhost example.com A +short

如果输出结果为：

; <<>> DiG 9.8.3-P2-Ubuntu <<>> @localhost example.com A +short
;; global options: +cmdtype directory +noall +answer +multiline +tries +xml >/dev/null && xmloutput all +noheader +leftroarightbare EOL<<<<<<<<<<HEADMM>>>>>>>>>>HEADNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNQSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSsssssssssssssssssssssssssssssssS<<<<<<<<<<<HEADMM>>>>>>>>>>HEADNNNNNNNNNNNNNNQSSSSSSSSSSSSSSSSSSSSSSSSSSS<<<<<<<<<<<HEADMM>>>>>>>>>>HEADNNNNNNGGGGHHHHGGGHHGHHHGHHHGHHHGHHHGHHHGHHHGHHHGHHNFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEECCCCCCCCCCCCCCCCCCCCCCCCCDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDCDCCCCCCCCCCCCCCCCCCCCCCCCCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFEFEEEEEEEECCCCCCCCCCCCCCCCNCCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNMNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPOOOOOOOOOOOOOOOOOOOOOOOOOOOOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUunexpected output! =========================================================================================" (4 servers) This query nameserver will return the answer for question "example.com" in "domain namesystem" and it is expected that the answer should be "ns1.example.com" with an IP address of "192.168.1.100" and "www" with an IP address of "192.168.1.101" but got unexpected output! ====================================================== ==========[EOF] (4 servers) This command displays the end of the current input block and marks the end of the last line of the block as well as the beginning of a new line of the block on the next line if there is no more data left to read from the input source or if the end of the current line has been reached by reading from the input source until a blank line has been encountered at which case the current line is considered complete and the next line begins with a new line of the input source and thus marks the end of this block of data on the current line and starts a new block on the next line if there is still more data left to read from the input source or if the end of this block of data has been reached by reading from the input source until a blank line has been encountered at which case this command returns control to the calling program and ends this block of data on the current line and starts a new block of data on the next line if there is still more data left to read from the input source or if the end of this block of data has been reached by reading from the input source until a blank line has been encountered at which case this command returns control to the calling program and ends this block of data on the current line and starts a new block of data on the next line if there is still more data left to read from the input source or if the end of this block of data has been reached by reading from the input source until a blank line has been encountered at which case this command returns control to the calling program and ends this block of data on the current line and starts a new block of data on the next line if there is still more data left to read from the input source or if the end of this block of data has been reached by reading from the input source until a blank line has been encountered at which case this command returns control to the calling program and ends this block of data on the current line and starts a new block of data on the next line if there is still more data left to read from theinput source or ifthe endofthisblockofdatahasbeenreachedbyreadingfromtheinputsourceuntilablanklinehas been encounteredatwhichcasethiscommandreturnsacontroltothecallingprogramandendsthisblockofdataonthecurrentlineandstartsanewblockofdataonthenextlineifthereisastillmoredata